Wireless & IoT

Counting mode and restart persistence are separate settings. Build a controlled acceptance test that checks the raw count and its interpretation after maintenance.

Saving a change in iMonnit does not prove that the sensor has received it. Use transaction status, communication evidence and a careful recovery record to verify the result.

A practical acceptance-test plan for iMonnit alarms: review rule actions, warn recipients, test delivery and verify the final armed state.

A Dragino sensor can run for years on one battery pack, but the real life is not found by reading a simple percentage on the device. The ER26500 lithium-thionyl chloride cell has a flat discharge curve, the radio draws short high-current bursts, and temperature can change what the battery can deliver. That is why battery life needs a calculation, not a guess. This guide explains how the ER26500 + SPC1520 pack works, how to estimate run time, when to replace the pack, and why

Understanding Sensor Heartbeats Aware States and Assessments

How to Unlock GPS Location Tracking on ALTA and ALTA XL IoT Gateways

How to Add Devices in iMonnit Step by Step Guide

Using Ethernet Gateway 4 on a Private Modbus TCP or SNMP Network

When an Ethernet Gateway 4 will not connect to iMonnit Online, the cause is usually one of a few things: the gateway is not assigned to the account, it does not have a working network path, DNS cannot resolve the destination, outbound traffic is blocked, or the gateway needs a firmware update. This guide walks through the checks in a practical order. Start at the top and work down. That gives Monnit Support the clearest picture if the gateway later needs diagnosis or repair.

What Is an NB-IoT Analog Sensor and How Does It Work

Optimal ALTA Sensor Placement for Reliable Gateway Communication