top of page

Portable test equipment or permanent monitoring? A guide for industrial sites

Feb 23
2 min read

Updated: 31 minutes ago

A spot reading can answer a maintenance question today. It cannot tell you what happened overnight. Decide how the reading will be used before choosing a handheld tester, a temporary logger or a permanently installed meter.

A spot reading for a maintenance visit

A technician investigating a single asset may need a portable meter or temperature probe. Specify the parameter, measurement range, accuracy and access conditions. If the result goes into a maintenance report, establish how the asset ID, date and instrument reference will be recorded.

Close-up view of a digital multimeter displaying voltage readings
ProSense digital multimeter in use

A record over a shift or shipment

A data logger can show when a temperature excursion began or how often a reading crossed a threshold. Work backwards from the report: specify the interval, recording duration, probe location and export format. If someone must respond during the event, include a live alarm requirement.

Permanent monitoring across a plant

For switchboards, process lines or remote assets, specify how readings will reach the existing control or monitoring system. List the required output or communications protocol, power source, reporting interval and how the site should handle lost communications. For several sites, include the site identifier that belongs with each reading.

What to put in the enquiry

Send the application, number of measurement points, required records and site postcodes. Include any existing model numbers, drawings or documentation requirements. ProSense Instruments can review the measurement hardware and flag where controls or software integration also needs scoping.


Need help with your application?


Share the application, device or interface documentation, sanitised diagnostic evidence and required outcome so ProSense can assess the next step.










Comments


bottom of page