top of page
Frequently asked questions
Product selection
Ordering & delivery
Quotes & payments
Manuals & setup
Warranty & returns
Care & troubleshooting
Follow the model-specific care and storage instructions. Keep connectors, sensing surfaces and housings clean using approved methods, protect equipment from impact, and store it within its specified temperature and humidity limits.
Do not assume that a probe, connector or enclosure can be immersed or pressure-washed unless its documentation permits it. Check calibration or verification requirements for your application.
Send your order number, complete model and serial number, wiring or installation photographs, power-supply details, controller or gateway model, relevant settings, and any error messages or screenshots. Explain what you expected and what the instrument actually reports.
Include when the issue began and what changed beforehand. This helps us distinguish configuration, installation, communications and equipment issues more efficiently.
Check the units, measurement range, output scaling and controller input settings against the applicable manuals. Also review mounting, environmental conditions, communication settings and any required calibration or verification.
For example, a 4–20 mA transmitter and its controller must use compatible ranges. Do not change safety-critical settings or bypass protective functions while troubleshooting; send the model details to our team if you are unsure.
ProSense Instruments supplies industrial instrumentation nationally and can help source calibration and compliance documents for a specified model and configuration. Ask at quotation stage which documents come with the instrument, which can be arranged separately and who will issue them.
For temperature probes and loggers, specify the calibration points, required uncertainty and whether the probe alone or the complete measurement system must be tested. For eligible equipment, ProSense can arrange NATA-endorsed calibration through an independent laboratory where the work falls within its accredited scope. Request written confirmation of scope, price and lead time.
For a tender or audit, send the exact model, variant, destination and document schedule. Depending on the equipment, requests may include a manufacturer declaration, electrical compliance evidence, a hazardous-area certificate, a test report or the manufacturer’s quality-system certificate. Ask us to identify the issuer, reference and applicable model on your quotation.
Read the procurement guide with four instrument examples
Request certificates or technical documentation
bottom of page
